Hydraulic & Pneumatic
Quality System
-
ISO 9001:2015 / JISQ9001:2015
Quality Management System
-
ISO 14001:2015
Environmental Management System
-
ISO 45001:2018
Occupational Health and Safety Management System
-
ISO/IEC 17025:2017 (LAB TAF)
Certified Quality System Approved In-House Lab with Integrated Equiqment
-
RoHS Compliant
We do not intentionally use any hazardous material required by “RoHS2 EU Directive 2011/65/EU and RoHS3 EU Directive EU/ 2015/863” within compounding process and any others processes.
-
REACH Compliant
We hereby declare that all products(articles) have been designed and manufactured do not contain SVHC above the threshold value.
Catalog Download
Hydraulic and pneumatic systems are used extensively in many industries. From the manufacturing and processing industries like injection molding and food processing to heavy construction machineries like cranes and hoists, and agricultural machineries like harvesters and tractors, hydraulic and pneumatic cylinders are an integral part of these fluid and air powered machineries. Hydraulic cylinders are also found the field of marine and offshore engineering, shipbuilding, aviation and just about every industry we can think of. The proper functioning of hydraulic cylinders depends on rubber seals designed for the retention of hydraulic fluid and the exclusion of foreign contaminants, while maintaining fluid pressure throughout the operation.
Hydraulic and pneumatic seals may look similar in appearance, but they are designed with very specific applications in mind. In the past, low-pressure hydraulic seals were used as substitutes for pneumatic seals, but over time the two have developed in different directions. Before pneumatic seals are installed into the cylinder, lubricants are applied to the seal and the sealing path in order to reduce abrasion and prolong the service life of the seal. The four important criteria in the selection of hydraulic and pneumatic seals are temperature of contact fluid and cylinder, fluid pressure, fluid media and speed of actuation.
GMORS hydraulic and pneumatic seals are made of various elastomers such as TPU, NBR, FKM and HNBR, and the seals are designed to perform to expectations in accordance with user specifications. GMORS has a wide range of material formulation available for selection, and our material specialists will assist you with our recommendations based upon service conditions such as fluid media, chemical compatibility, operating temperature and pressure and so on. In addition, GMORS makes use of high precision in-house rapid mold design, design simulation capabilities and many years of manufacturing experience to help our customers optimize seal design. With continuous testing from product sample to final mass production, along with the implementation of various system management procedures such as PLM, MES, SAP and so on, we offer hydraulic and pneumatic seals of great quality with complete traceability.
Hydraulic and Pneumatic Products:
Wiper seal, rod seal, piston seal, symmetrical piston and rod seal, damper, customized seals, rubber gasket, etc.
